Nachi Gear Pump IPH Series Duplex Pump
●The high-pressure, low-noise IPH series IP pump becomes a double pump, which can further expand the use range of the IPH pump.
●The combination of the pump is in many forms, and the best combination can be selected according to the purpose.
Online consultation
Product description / Product description
Nachi Gear Pump IPH Series Duplex Pump Features:
1. Maximum pressure: the maximum pressure limit under the condition of frequent pressure changes
2. Oil suction port pressure: -0.03~+0.03Mpa(-0.3-+0.3kgf/cm
3. Avoid installing the suction port on the underside of the pump. In addition, when the rotation speed exceeds 1800min”, the N inlet is separately piped and installed on the shaft side
4. When a piping flange is required, please refer to the following form
5. The normal pressure is the continuous use pressure when the same pressure is used on the head side and the shaft side.
6. The performance of the pump on the head side and the shaft side is the same as that of the single pump, and the required power is the sum of the two pumps.
7. The power value (kW) required in 1200min” and 21Mpa in the above table is the maximum displacement value of each form. On the head side and the shaft side together, it is the value used for 21Mpa. The so-called maximum cooperation of each form is: IPH- 22B is IPH-22B-8-8-11, and IPH-46B is IPH-46B-32-125-11.
